Please use this identifier to cite or link to this item: http://hdl.handle.net/2440/100588
Citations
Scopus Web of ScienceĀ® Altmetric
?
?
Type: Conference paper
Title: Graded proppant injection into coal seam gas and shale gas reservoirs for well stimulation
Author: Keshavarz, A.
Badalyan, A.
Carageorgos, T.
Bedrikovetsky, P.
Johnson, R.J.
Citation: Proceedings of SPE European Formation Damage Conference and Exhibition, 2015 / vol.1, pp.SPE-174200-MS-1-SPE-174200-MS-15
Publisher: Society of Petroleum Engineers
Issue Date: 2015
ISBN: 9781510811645
Conference Name: SPE European Formation Damage Conference and Exhibition (03 Jun 2015 - 05 Jun 2015 : Budapest, Hungary)
Statement of
Responsibility: 
Alireza Keshavarz, Alexander Badalyan, Themis Carageorgos, Pavel Bedrikovetsky, and Ray Johnson Jr.
Abstract: Low productivity indices are observed in many moderate-to low-permeability coal bed methane (CBM) and shale gas (SG) reservoirs due to low aperture and poor connectivity of natural cleats. A method is proposed for injection of graded proppant particles into a cleat system below the fracturing pressure to keep coal cleats and shale fractures open during water-gas production. Graded proppant injection in CBM and SG reservoirs can: stimulate a stress sensitive cleat system below the fracturing pressure; enhance fracturing treatment by invading cleats, lowering fluid leak-off, and maintaining aperture during production; and provide a periodic or remedial treatment to counter effective stress on the cleats improving production by maintaining cleat aperture. Laboratory tests on bituminous coal core flooding with water under increasing pore pressure with graded proppant injection at the maximum pore pressure (minimum effective stress) have been carried out at different ionic strengths and high pH of the injected water. Proppant particles penetrate deeper into coal matrix at low ionic strength of injected water corresponding to electrostatic particle-particle and particle-coal repulsion. No particle agglomeration and formation of particle-formed cake at the entrance of coal cleats are observed at these conditions. Coal permeability increases by about 2.2 times as the result of a single-sized small particle injection. Followed injection of larger particles leads to a greater enhancement of coal core permeability. An overall increase of coal core permeability after graded proppant injection is about 2.7 times. The proposed method can significantly increase very low productivity index in stress sensitive coals and shales without hydraulic fracturing. It can be also used as a non-damaging leak-off additive during hydraulic fracturing stimulation treatments and to aid long-term conductivity.
Keywords: Coal seam gas; graded proppant injection; productivity enhancement; natural fracture stimulation
Rights: Copyright 2015, Society of Petroleum Engineers
RMID: 0030041160
DOI: 10.2118/174200-MS
Grant ID: http://purl.org/au-research/grants/arc/DP1094299
http://purl.org/au-research/grants/arc/LP100100613
http://purl.org/au-research/grants/arc/LP110200799
Appears in Collections:Australian School of Petroleum publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.