Please use this identifier to cite or link to this item: https://hdl.handle.net/2440/117747
Citations
Scopus Web of Science® Altmetric
?
?
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMahmoud, S.-
dc.contributor.authorLau, T.-
dc.contributor.authorNathan, G.-
dc.contributor.authorMedwell, P.-
dc.contributor.authorAlwahabi, Z.-
dc.contributor.authorDally, B.-
dc.date.issued2019-
dc.identifier.citationProceedings of the Combustion Institute, 2019; 37(1):927-934-
dc.identifier.issn1540-7489-
dc.identifier.issn1873-2704-
dc.identifier.urihttp://hdl.handle.net/2440/117747-
dc.description.abstractMeasurements of soot volume fraction (SVF) using planar Laser-Induced Incandescence (LII) were performed in a set of attached turbulent non-premixed jet flames, burning the same mixture of C2H4/H2/N2. A novel post processing technique was used to identify and characterize the average width (Ws) and volume fraction of the soot sheets and correlate it with key flame features and parameters. The axial distributions of both Ws and SVF, within those sheets, in all flames are shown to grow with flame length up to the region where soot oxidation becomes significant, with only a secondary dependence on the inflow conditions. Probability density functions (pdfs) of Ws are seen to exhibit far less variation than those of SVF, also indicating the soot structure morphology insensitivity to inflow conditions. The effects of fuel exit strain (U/D) and bulk exit Reynolds number (ReD) on soot sheets are also assessed for three flames, of which two share the same U/D and two share the same ReD. The variation in U/D at constant ReD is seen to only affect SVF within the sheets, while a variation in ReD, at constant U/D is shown to have negligible effect on both Ws and SVF, in agreement with previous findings by the authors. Finally, a strong power-law correlation is deduced from joint statistics for Ws and SVF through all flame locations and for all the flames investigated.-
dc.description.statementofresponsibilityS.M. Mahmoud, T.C. Lau, G.J. Nathan, P.R. Medwell, Z.T. Alwahabi, B.B. Dally-
dc.language.isoen-
dc.publisherElsevier-
dc.rights© 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.-
dc.source.urihttp://dx.doi.org/10.1016/j.proci.2018.06.108-
dc.subjectSoot; sheet; strain; turbulent; laser-induced incandescence-
dc.titleA new correlation between soot sheet width and soot volume fraction in turbulent non-premixed jet flames-
dc.typeJournal article-
dc.identifier.doi10.1016/j.proci.2018.06.108-
dc.relation.granthttp://purl.org/au-research/grants/arc/DP130100198-
pubs.publication-statusPublished-
dc.identifier.orcidLau, T. [0000-0003-1851-706X]-
dc.identifier.orcidNathan, G. [0000-0002-6922-848X]-
dc.identifier.orcidMedwell, P. [0000-0002-2216-3033]-
dc.identifier.orcidAlwahabi, Z. [0000-0003-4831-7798]-
Appears in Collections:Aurora harvest 3
Mechanical Engineering publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.