Please use this identifier to cite or link to this item: http://hdl.handle.net/2440/43391
Citations
Scopus Web of Science® Altmetric
?
?
Type: Journal article
Title: Effect of material properties of composite restoration on the strength of the restoration-dentine interface due to polymerization shrinkage, thermal and occlusal loading
Author: Borkowski, K.
Kotooussov, A.
Kahler, W.
Citation: Medical Engineering & Physics, 2007; 29(6):671-676
Publisher: Elsevier Sci Ltd
Issue Date: 2007
ISSN: 1350-4533
1873-4030
Statement of
Responsibility: 
Krzysztof Borkowski, Andrei Kotousov, Bill Kahler
Abstract: The purpose of this investigation was to adopt an analytical approach to analyse stresses at the restoration-dentine interface caused by polymerization shrinkage, occlusal and thermal loading with the primary focus on evaluating the effect of the material properties of the composite restoration on the strength of the interface. Some essential simplifications were employed to derive an explicit analytical solution. The results confirm previous findings that interfacial stresses due to polymerization shrinkage are increased with the higher modulus of elasticity of the restoration, while Poisson's ratio of the restorative material has a very small influence on these stresses. Occlusal loading resulted in much lower interfacial stresses when compared to shrinkage and thermal loads. The obtained results were in a good agreement with other numerical and clinical studies. From the modelling analysis it was found that the majority of commercially available composite restorative materials are expected to create significant interfacial stresses when subjected to cold temperatures. In addition, it was shown that there is a considerable potential for interfacial stresses to be minimised by an appropriate selection of thermo-mechanical properties of the restorative material especially with the new finding on the negative temperature variation effect.
Keywords: Dentin; Humans; Polymers; Composite Resins; Resin Cements; Dental Materials; Materials Testing; Dental Stress Analysis; Dental Restoration Failure; Temperature; Phase Transition; Surface Properties; Adhesiveness; Elasticity; Stress, Mechanical; Tensile Strength; Hardness; Models, Chemical
Description: Copyright © 2006 IPEM Published by Elsevier Ltd.
RMID: 0020070645
DOI: 10.1016/j.medengphy.2006.07.009
Description (link): http://www.elsevier.com/wps/find/journaldescription.cws_home/30456/description#description
Appears in Collections:Mechanical Engineering publications
Materials Research Group publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.