Please use this identifier to cite or link to this item: https://hdl.handle.net/2440/62119
Citations
Scopus Web of Science® Altmetric
?
?
Type: Journal article
Title: Evaluation of parameter setting for two GIS based unit hydrograph models
Author: Gibbs, M.
Dandy, G.
Maier, H.
Citation: Journal of Hydrology, 2010; 393(3-4):197-205
Publisher: Elsevier Science BV
Issue Date: 2010
ISSN: 0022-1694
1879-2707
Statement of
Responsibility: 
M.S. Gibbs, G.C. Dandy and H.R. Maier
Abstract: For watersheds where flow data are unavailable, the geomorphology-hydrology relationship can be used to estimate the direct flow response to excess rainfall. Two of the most common approaches used to compute this response are Geomorphological Instantaneous Unit Hydrographs (GIUH) and Spatially Distributed Unit Hydrographs (SDUH). In the former, the hydrograph is determined from the input of morphometric parameters and an average channel velocity, where in the latter a time-area relationship is used to compute the hydrograph. Generally, both approaches involve an estimate of velocity to parameterize the Unit Hydrograph (UH), however, information on this parameter is generally limited for watersheds where these methods are most appropriate, when there is no flow data to derive the UH directly. The aim of this work is to investigate if the velocity parameters involved in GIUH and SDUH methods can be estimated directly from watershed characteristics, and allow these methods to be applied in ungauged watersheds. Four watersheds in southern Australia with daily flow records have been considered, to allow the observed direct flow response to be determined. It was found that both approaches could be calibrated to accurately represent the expected response for all four watersheds considered. The SDUH model implemented considered hillslope and channel flow processes separately, which allowed the velocity parameters involved to be estimated from the watershed using Manning's equation. However, the GIUH model combines these flow processes into one average velocity parameter, and due to this averaging a relationship between the calibrated value and the watershed characteristics could not be determined. The results suggest that the SDUH model can be directly parameterized for a given watershed in the absence of flow data, however, further work is required to investigate if the relationships proposed are suitable for a wider range of watersheds. © 2010 Elsevier B.V.
Keywords: Surface water
Spatially distributed routing
Geographic information systems
Geomorphology
Modeling and model calibration
Australia
Rights: Copyright 2010 Elsevier B.V. All rights reserved.
DOI: 10.1016/j.jhydrol.2010.08.014
Grant ID: ARC
Published version: http://dx.doi.org/10.1016/j.jhydrol.2010.08.014
Appears in Collections:Aurora harvest
Civil and Environmental Engineering publications
Environment Institute publications

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.