1. Adelaide Research & Scholarship

Browsing "Materials Research Group publications" by By Date

Jump to a point in the index:
Showing results 1 to 20 of 222  next >
PreviewIssue DateTitleAuthor(s)
2013Architectural design of diamond-like carbon coatings for long-lasting joint replacementsLiu, Y.; Zhao, X.; Zhang, L.; Habibi, D.; Xie, Z.
2013Characterizing water sorption in 100% solids epoxy coatingsConiglio, N.; Nguyen, K.; Kurji, R.; Gamboa, E.
2013Hydrothermal ageing of X65 steel specimens coated with 100% solids epoxyGamboa, E.; Coniglio, N.; Kurji, R.; Callar, G.
2013Extremely hard, damage-tolerant ceramic coatings with functionally graded, periodically varying architectureWo, P.; Zhao, X.; Munroe, P.; Zhou, Z.F.; Li, K.; Habibi, D.; Xie, Z.
2012On the non singular higher order terms in bi-dimensional and three-dimensional engineering applicationsBerto, F.; Lazzarin, P.; Kotooussov, A.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012Steady flow towards a row of collinear hydraulic fracturesKhanna, A.; Kotooussov, A.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012Bending strain measurements utilising a scanning laser Doppler vibrometerWildy, S.; Kotooussov, A.; Cazzolato, B.; Codrington, J.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012Effects of irradiation and non-enzymatic glycation on the fracture resistance of bovine cortical boneFletcher, L.; Codrington, J.; Parkinson, I.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012The economics of applying internal coatings to pump casingsWong, A.; Vince, P.; Gamboa, E.; Annual Conference of the Australasian Corrosion Association (2012 : Melbourne, Victoria)
2012On the residual opening of cracks with rough faces stimulted by shear slipBortolan Neto, L.; Kotooussov, A.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012A realistic assessment of recoverable thermal energy from Australian geothermal reservoirs: a simulation studyDoonechaly, N.; Rahman, S.; Kotooussov, A.; Australian Geothermal Energy Conference (5th : 2012 : Sydney, Australia)
2012Revealing microstructural and mechanical characteristics of cold-drawn pearlitic steel wires undergoing simulated galvanization treatmentFang, F.; Hu, X.J.; Chen, S.H.; Xie, Z.; Jiang, J.Q.
2012Microstructure and high temperature wear of the aluminum matrix composites fabricated by reaction from Al-ZrO₂-B elemental powdersZhu, H.; Jia, C.; Li, J.; Zhao, J.; Song, J.; Yao, Y.; Xie, Z.
2012Nanocomposite bilayer film for resisting wear and corrosion damage of a Ti-6Al-4V alloyXu, J.; Liu, L.; Xie, Z.; Munroe, P.
2012Plasticity-induced crack closure model for two collinear cracks in plates of arvitrary thicknessChang, D.; Kotooussov, A.; Australasian Congress on Applied Mechanics (7th : 2012 : Adelaide, S.A.)
2012Enhanced corrosion-resistance in nanocrystalline MoSi₂ films enabled by Cr additionsXu, J.; Lai, D.; Wu, J.; Xie, Z.; Munroe, P.
2012Residual opening of hydraulically stimulated fractures filled with granular particlesBortolan Neto, L.; Kotooussov, A.
2012Reaction pathways, activation energies and mechanical properties of hybridcomposites synthesized in-situ from Al-TiO₂-C powder mixturesZhu, H.; Jiang, Y.; Yao, Y.; Song, J.; Li, J.; Xie, Z.
2012Modelling the three-dimensional vibration of composite archery arrows under free-free boundary conditionsRieckmann, M.; Park, J.; Codrington, J.; Cazzolato, B.
2012The evolution of AlTiSi intermetallic phases in Ti-added A356 Al-Si alloyGhomashchi, R.
Showing results 1 to 20 of 222  next >