Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBrett, P. R.-
dc.coverage.spatialAdelaide Geosyncline, Burra Mine area, South Australiaen
dc.descriptionThis item is only available electronically.en
dc.description.abstractAn area of some 25 sq. miles was investigated including Burra and the district south of it. The copper deposits of Burra, of such fundamental importance to the early colony, were discovered in 1843 and subsequently worked by the S.A. Mining Association, who obtained some 234,600 tons of ore of approximately 22% grade. The mine finally closed in 1877 due to cessation of mining, drop in the price of copper etc. The area is essentially a part of the Mt. Lofty - Flinders Ranges and is of mature topography. The rock sequence consists of a sequence of marbles, limestone, dolomites, fluvioglacials, quartzites and shales of Sturtian and Torrensian age folded into a series of gently north-pitching folds, the fold axes lying approximately 1 mile apart. Folding is most intense in the vicinity of the Burra Mine and the Princess Royal Mine, where a closed dome structure occurs. Strike faulting along the axes of anticlines is quite prominent, the Karinga Fault extending right through the area and having a stratigraphic displacement of up to 10,000 feet. The only igneous rock found was a felspar porphyry outcrop, lying about 1/4 mile west of the Burra Mine. Copper mineralisation consisting of mesothermal veins of chalcopyrite, bornite and pyrite in a gangue of calcite, quartz with occasional barite is common throughout the area. These veins commonly occur in reverse strike faults. Supergene carbonate derived from the primary mineralisation is common, and is believed to have formed by the precipitation of downward percolating acid copper solutions with carbonate wall-rock. The two main mineralised zones of the area are the Princess Royal Mine where low grade veins occur in a brecciated and shattered zone at the axis of the dome structure, and the Burra Mine where low grade veins occurred in the brecciated zone between two strike faults. Precipitation of carbonate has been considerable at the Burra Mine, where the supergene ore occurred as a cigar-shaped "blanket". The primary ore was localised by the intersection of the two strike faults with a series of dolomites and limestones. From an examination of the area, the likelihood of finding a new orebody is remote, and the discovered orebodies appear either to be worked out or else uneconomic.en
dc.subjectHonours; Geologyen
dc.titleThe geology of an area immediately south of Burra, with particular reference to mineralisation.en
dc.contributor.schoolSchool of Earth and Environmental Sciences, Geology & Geophysicsen
dc.provenanceThis electronic version is made publicly available by the University of Adelaide in accordance with its open access policy for student theses. Copyright in this thesis remains with the author. This thesis may incorporate third party material which has been used by the author pursuant to Fair Dealing exceptions. If you are the author of this thesis and do not wish it to be made publicly available, or you are the owner of any included third party copyright material you wish to be removed from this electronic version, please complete the take down form located at:
dc.description.dissertationThesis (B.Sc.(Hons)) -- University of Adelaide, School of Earth and Environmental Sciences, 1956-
Appears in Collections:School of Physical Sciences

Files in This Item:
File Description SizeFormat 
01frontGeoHon.pdfTitle page, table of contents, abstract174.94 kBAdobe PDFView/Open
02wholeGeoHon.pdfWhole thesis (as available) ex figs, maps1.47 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.